Geeetech A10 / A10M Y-Axis Endstop Limit Switch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgraded my Geeetech A10M Y carriage to an New Ender3 type. Due to the roller mounts being further apart i had to…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 2
- Wyświetlenia
- 411
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Upgraded my Geeetech A10M Y carriage to an New Ender3 type to reduce mass. Due to the roller mounts being further apart i had to create a new mount for Y axis end stop limit switch. (see y carriage photo RED and YELLOW circles show the different mount positions.)
To mount to V-slot rails use M4 T-Nuts and M4x10mm screws
Print Settings
Printer:
Geeetech A10M
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20
Filament: Generic PETG, PLA-F, PLA Black
Notes:
up to 0.2 layer height would work well also, printed with 4 walls and 1mm top and bottom layers for added strength, especially around screw holes.
Category: 3D Printer Parts