Geometric Sculpture #01
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A geometric sculpture, easy to print and easy to plug the parts together.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 154
- Wydruki
- 1
- Wyświetlenia
- 631
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Object description:
Geometric sculpture no. 01.
Print the parts in the suggested direction. If required, paint on support is already defined, also modifiers for infill and perimeters.
The parts can be simply plugged together. Glue is not required but can be used.
A multi-colour version is also available.
Number of parts to be printed:
1x Sculpture-#01-corner_bottom
2x Sculpture-#01-corner
3x Sculpture-#01-curve
1x one of the different base types
If you choose one of the versions with the bore hole, you need a pin of dia. 8mm. 53mm long for the square base and 70mm long for the triangle base.
The mounting hole in the corner part will not be perfectly round. I therefore recommend carefully reworking the hole by hand with a drill.
In addition, stands with different pin diameters from 8.0 to 7.7 mm are now available. For a perfect fit, I recommend a small test print of the pin before printing the complete stand.
Links to the other sculptures of this series:
| Geometric Sculpture #02: |  | Link |
| Geometric Sculpture #03: |  | Link |
| Geometric Sculpture #04: |  | Link |
| Geometric Sculpture #05: |  | Link |
| Geometric Sculpture #06: |  | Link |
| Geometric Sculpture #07: |  | Link |
| Geometric Sculpture #08: |  | Link |
| Geometric Sculpture #09: |  | Link |
| Geometric Sculpture #10: |  | Link |
| Geometric Sculpture #11: |  | Link |
| Geometric Sculpture #12: |  | Link |
| Geometric Sculpture #13: |  | Link |
| Geometric Sculpture #14: |  | Link |
| Geometric Sculpture #15: |  | Link |
| more will follow… | … |
Update 2024-11-19:
Crosslinks to sculpture #13, #14 and #15 added.
Update 2024-08-21:
Crosslinks to sculpture #11 and #12 added.
Update 2024-07-22:
Crosslinks to sculpture #06 to #10 added.
Update 2024-07-15:
Base_square_pin versions with dia. 7.9/7.8 and 7.7mm pin diameter and corresponding comment in the description added.
Recommended print settings:
Material: PLA, ASA/ABS, PETG.
Resolution: 0,2mm
Infill: 5%
Perimeter: 2
Support: already included where required