BigTreeTech (BTT) Eddy probe for IO-Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the BigTreeTech Eddy probe mount for the TwoTrees Sapphire Plus (SP-5) and Sapphire Pro (SP-3).
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 747
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is the BigTreeTech Eddy probe mount for the TwoTrees Sapphire Plus (SP-5) and Sapphire Pro (SP-3). The original IO-Mount on Cults doesn't include this probe mount. Please follow the material print guidelines for the IO-Mount specified in the original instructions.
You will need this in your startup macro to set the height at what you need. The best way I have found to do this is to do a test print and live adjust Z to the height you need and then take that number and plug it into this line and it will set it for you at the beginning of every print.
SET_GCODE_OFFSET Z=-0.xx MOVE=1
You will have to set this for every sheet that you use. Mine is different between even the springsteel side and PEI side of the same sheet. I comment out the other sheets.
===example===
#SET_GCODE_OFFSET Z=-0.26 MOVE=1 #PEI Side
#SET_GCODE_OFFSET Z=-0.5 MOVE=1 #Steel Side
SET_GCODE_OFFSET Z=0.2 MOVE=1 #Dobstfy Sticker Plate
===example===
SP-5 IO-Mount
https://cults3d.com/:627629
SP-3 IO-Mount
https://cults3d.com/:627634
IO-Mount Creator
https://www.printables.com/@AndresPalomo_95968
https://cults3d.com/en/users/AndresPalomo/3d-models