Rogue Lap Steel Nut - RLS-1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement nut for the Rogue RLS1 Lap Steel guitar. This is a direct replacement using the same screw holes, although…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement nut for the Rogue RLS1 Lap Steel guitar. This is a direct replacement using the same screw holes, although I would recommend a longer and larger screw. It will work with the existing hardware but has been designed to accommodate a #5 wood screw with a pan
head. The string spacing on these is 3/8" which makes the nut slightly wider than the original. This will give you a little more room for playing single notes with the bar and behind the bar bends. I printed these solid, the original nut is hollow. I have included 2 versions designed to keep the tops of the strings flat with the different string gauges required for C6 and Open G tuning. The Open G will probably work for Open D and E as well. Printed with 100% infill I found an improvement in sound as compared to the original hollow nut. I would recommend printing in a harder material, PLA seems to work fine but I would think PETG would be too soft. I recommend a brim to keep the corners from lifting during print; I use 8mm.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.12
Infill:
100%
Filament: Hatchbox PLA
Black
Notes:
I would recommend printing in a harder material, PLA seems to work fine but I would think PETG would be too soft. I recommend a brim to keep the corners from lifting during print; I use 8mm.
Category: Music