Mercedes-Benz W212 2010 2011 E350 Cup Holder Telephone Rest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is is for the (pre-facelift 2010 and 2011) Mercedes-Benz W212 E350 I was laying my phone in the cupholder. This…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 903
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is is for the (pre-facelift 2010 and 2011) Mercedes-Benz W212 E350
I was laying my phone in the cupholder. This one props it up at a better angle. It is a donut so you can run the cable underneath. The phone slot lines up with the gap between the cup holders so wider phones can be used, or a phone can be used in horizontal orientation.
The car's cover/lid can still be used with this in place. The angled slot cutout allows the car's light to shine into the space.
Print in ABS because it is going into a hot car in the summer.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
variable, used smaller layers for slope at top
Infill:
10%
Filament: Doesn't matter ABS
Notes:
I used variable layer height, 0.3 on the lower part, and 0.10 on the sloped higher part for a better finish.
Category: Automotive
