16mm Tube Clip with Thin Filament Guide - Set of 5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a small profile filament guide to fit my spool shelf used for filament feeding to the MK4 MMU3. 1st time make!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE 5/6/2025: I printed this in PETG with 100% infill and the durability went up tremendously. The PLA versions held pretty decently but started to break down a bit over time and with usage. The PETG versions are much stronger and I think will hold better over time.
Adding the bgcode file for PETG.
ORIGINAL:
This was printed on my MK4 using Prusament PLA color “My Silverness” at 100% infill with 3 perimeters. I used supports for the guide and printed it on it's side to reduce the print time and support stability in the model.