OOKER | foldable table hook, print-in-place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Your purse's new best friend. A foldable table hook, to keep your purse in-sight and within hand-reach.
- Ocena
- 4,25 / 5
- Polubienia
- 55
- Pobrania
- 237
- Wydruki
- 4
- Wyświetlenia
- 950
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution — Noncommercial
OOKER | foldable table hook, print-in-place
Your purse's new best friend. A foldable table hook, to keep your purse in-sight and within hand-reach.
Thick or thin tables, it works on all.
100% print-in-place, no assembly needed. The hinge was designed so the 2 articulated pieces can be printed together in one go.
It prints in 20min and only needs 13g of filament.
The hooks on the pictures were printed with PLA.
But if you hang a heavy bag for a while, the hook changes shape a little and doesn't swivel back in as well.
So PETG or strong PLA might work better.
Happy printing!
DIMENSIONS (closed) | W 12 mm x D 69 mm x H 52 mm
DIMENSIONS (open) | W 12 mm x D 69 mm x H 88 mm
3D PRINT SETTINGS
100% print-in-place.
The STL file is already oriented properly.
No supports needed.
No Brim needed.
Resolution: 0.3mm/layer or less
Wall line count: 2
Infill: 40%
Build adhesion type: None
Supports: None