Hydration water bladder PET connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Are you frustrated with the inconvenience of using your hydration bladder? Check out this solution!
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 1047
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v2.0
Tired of the Hassle? Simplify Your Hydration Bladder with 3D-Printed Parts
Are you frustrated with the inconvenience of using your hydration bladder? Discover these innovative 3D-printed parts designed to enhance your experience and make hydration easier and more efficient. Fits a standard PET thread known as PCO-1881.
Material: PETG
Instructions:
Feed the Hose:
- Insert an 8mm hose from your water bottle directly through the designated hole.
Connect the Cap:
- Attach the screw-on cap securely to the bladder.
Lock and Go:
- Ensure the cap is locked in place, and you're ready to head out!
Additional Features:
- Extra Screw Cap:
- An additional screw cap is included for storing an extra bottle or securely closing the hose.
Note:
- While the setup is designed to be water-tight, leakage might occur if the bottle is held upside down.
With these 3D-printed parts, managing your hydration bladder becomes a breeze, allowing you to focus more on your adventure and less on the hassle.