1 / 2
Rock Band Guitar Whammy Bar Holder Replacement — zdjęcie 1
1 / 2

Rock Band Guitar Whammy Bar Holder Replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement part for the whammy bar on a Rock Band guitar controller

Ocena
0 / 5
Polubienia
7
Pobrania
63
Wydruki
0
Wyświetlenia
377
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The plastic piece on my Rock Band guitar that kept the whammy bar from moving too far back broke, so I made a new one! This is specifically a Rock Band 2 Wii guitar. I imagine it'll work with other “Stratocaster” guitars made for other consoles or games in the series, but I would appreciate feedback on if it does or not!

When printing it, make sure to turn off “Thick bridges” under print settings if you're using PrusaSlicer. I've found that it messes with the clearances of the holes.

Tagi