Hex locks for complete modified hinged lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Changed the locks to contour with the edge of the enclosure
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 55
- Wydruki
- 4
- Wyświetlenia
- 343
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I love this hinged lid mod for the Original Prusa Enclosure https://www.printables.com/model/676280-complete-modified-hinged-lid-for-original-prusa-en it really seals up good and keeps the panel right side up.
The original locks work good but I didn't like the way they stuck out over the front edge. And being clumsy i figured I'd drop or smash them with something and break them off, so I designed them to hug the top while locked. I took advantage while redesigning them to make them Hexes.
there is a small indent underneath to allow room for a screw or rivet in the hole under it. Don't forget to mirror your second lock so the indent is on the opposite side.
Printing these standing up the overhangs are short enough to not need supports.
Thank you Petr Zikmund for making this great mod!