Kappy belt clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed parts to replace the M3 screws and zipties that are used to secure belts in place on Rolohaun's Kappy printer
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 232
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Rolohaun's Kappy 3D printer normally has the builder wrap belts around screws and ziptie the belts in place. These printed parts hold the belt in place and get anchored onto the existing screws for holding belts in place.
Y belt clamp: insert both ends of the belt into the toothed groove and insert into the existing clamp toothed side first. Screw m3 screws through the holes in the new part
Z belt clamps: insert the belt ends into the toothed grooves and screw through them into the heated inserts on the left and right Z carriages