1 / 1
40mm Fan Shroud for 10Gb NIC Inter-Tech ST-7211 — zdjęcie 1

40mm Fan Shroud for 10Gb NIC Inter-Tech ST-7211

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a clip-on 40mm fan shroud for the Inter-Tech ST-7211 10Gb SFP+ Network Card.

Ocena
0 / 5
Polubienia
2
Pobrania
31
Wydruki
0
Wyświetlenia
308
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This is a clip-on 40mm fan shroud for the Inter-Tech ST-7211 10Gb SFP+ Network Card. 

Print with supports -→ screw on fan -→ clip onto heatsink

In order to connect the fan to the network card you may need so solder a JST-XH 2 Pin connector onto the empty 12V Pins on the network card and the corresponding plug onto the fan wire. Or if you use a Noctua NF-A4x10 FLX fan you can use the included adaptor, so you don't have to cut any wires.

The shroud should be compatible with any heatsink with the dimensions 60.3 x 55.4 x 10 mm (w x h x d), but no guarantee

Tagi