Linkable hook for french cleat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Linkable hook via 8mm (3D printer) bars for 15mm french cleat
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I kept knocking off the regular hooks when taking something of so I made this version where you use an 8mm bar from an old 3D printer to link multiple together.
Printing
I've printed them with regular PLA, 3 wall layers and an infill of 25% and I haven't had any problems so far.
Remixing
The model was made with OnShape and should be available to all https://cad.onshape.com/documents/5d6f040f905bc86da2ecab88/w/341c4a905c907bbc0980aabd/e/f874c125019eedc31f4fb3e9
The cleat configuration is in the first tab (on the bottom), the settings per model are in the part studio itself in a folder called variables.