1 / 2
6 bladed add on carrier for Yardforce Mowbest 805 — zdjęcie 1
1 / 2

6 bladed add on carrier for Yardforce Mowbest 805

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An add on blade carrier for double the amount of blades, higher cutting speed and wider cutting width.

Ocena
0 / 5
Polubienia
5
Pobrania
34
Wydruki
0
Wyświetlenia
221
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

The add on carrier mounts on the original 3 blade holes with the original blade holding bolts. Another 6 bolts, blades and and 6 M4 nuts (ideally Nylocks) transform your timid Yardforce 805 (and probably also the other budget Eco 500, 600, Florabest etc) into the machine it should have always been. At 8 blades she was howling enervingly, 6 adds a swooshing sound but is not overly disturbing I find as a neighbour. Due to the higher cutting speed and the wider track of around plus 40mm, there is an increase in work getting done and a satisfying trench of fresh cut lawn is apparent whereever she leaves. If it is higher it even gets piled up to one side by the momentum, something I haven't seen before.

Printed in PETG at 100% infill she has seen month of regular and somewhat harsh service without much wear to the plate, the blades get nicked badly though if something not grassy gets into the works.