Bardwood Grove storage insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Will fit all Bardwood Grove base game + Kickstarter exclusives + Spirits of the Grove expansion in original game box.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 105
- Wydruki
- 2
- Wyświetlenia
- 555
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't like the box lid lift the original Kickstarter insert causes in this game and I wanted all the Kickstarter extras and expansion to fit in one box (rather than 3 boxes) so I designed this to do it.
I printed this on a Bambu Labs X1C with PLA Basic. No special settings, just the PLA default setting. I used a textured PEI plate but any plate would do.
I made peg & hole connection for the base layer parts to join them together. Turns out I really didn't need to so the pegs could be cut off in your slicer. With them I had to do a tiny bit of trimming on the bottom of the peg to get the support material off so it would fit in the hole.
The images should give you enough to go on to fit it all in the box.