Fallout 10mm Pistol (FO4)

10mm Pistol from Fallout 4.

The pistol upper uses 2 M3 heat set inserts to attach the NO SIGHT plate or the reflex sight mount, and the reflex sight mount uses 2 of the same M3 heat set inserts as well for securing it to the mounting plate.

Any M3 screws of 8mm length should work well but BHCS (button head screws) look best in my opinion.

The suppressor prints in two parts as I could not think of how to model it in one piece and have it line up correctly when screwed in tight. I suggest printing both parts and testing the fit first, then screw the threads into the pistol until tight and slide the suppressor over the threads with glue while trying to keep it aligned.

You can also glue 6x3mm magnets in the pistol grip and magazines to make them stick in nicely. I also suggest sanding the magazines and pistol magazine well with a high grit sandpaper to make loading magazines much smoother.

The reflex sight has 2 1mm wide gaps on the underside to insert some plastic that acts as the “lenses” for the sight. Dimensions for the lenses are 11.5mm wide at the top, 18.5mm tall, and 16.25mm wide at the bottom. The lenses can be tacked in place with a small amount of glue.

If anyone has any critiques or suggestions for the model please reach out and let me know.

While I did create the reflex sight and suppressor for this design, the base model and all credit for it belongs to @ReProps and their excellent model.