Nevermore V6 Micro - 1515 Clip Mount - Voron 0 compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Look ma! No Screws!
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 696
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
If you like this model and use it please upload a like, it really helps others find it!
I couldnt be bothered to take my V0 apart to get some nuts in to mount my nevermore in there, and I didnt wanna order 1515 tnuts cause I'm very impatient :P
Thus, I found these cable clips that have a very tight fit, then modified it into the little triangle thing that mounts the nevermore. Works amazingly well, might need to be reprinted if you take it off and on a bunch, but the fan unit just stays for me, i just pull out the top half with the carbon anyway.
Orient the print on one ot the two edges as shown in the second photo, make sure your printer is well tuned, especially for retracts, and watch the cooling on the very top of the part. It helps to print 2-3 at once just to make the layers take longer.