Wiha holder for slimline and screwdrivers including the Wiha Speed-E II (2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a nice organizer so I drew and printed the ultimate one!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 638
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought the Wiha Speed-E II electric screwdriver and loved it.
So I ordered all slimbits available and a few handles and made this ultimate holder.
The bits are even held in place with magnets (8x2mm) to click in place with a satisfying click.
The pins that the 2 smaller screwdrivers rest upon are designed to be strengend by screwing in a 3,5mmx35mm screw.
The charger is clicked in the holder and also easily clicks out.
Some CA glue assembly required.
You can also just print the bitholder if you want ;-)
In total it holds the following:
- Wiha Speed-e II (2) + charger
- Wiha Slim holder
- Wiha Picofinish
- Wiha Stubby
- SL/PZ1, SL/PZ2
- PZ0, PZ1, PZ2
- PH0, PH1
- PH2,
- Hex 1.5, Hex 2, Hex 2.5, Hex 3, Hex 4, Hex 5, Hex 6
- Torx 5, Torx 6, Torx 7, Torx 8, Torx 9, Torx 10, Torx 15, Torx 20, Torx 25
- Flat 1.5, Flat 2, Flat 2.5, Flat 3, Flat 3.5, Flat 4, Flat 5.5, Flat 6.5
As mentioned it requires round 8x4mm magnets(x32) (or 2, round 8x2mm magnets but the x64)
Printer setting:
- I printed with Prusament PETG
- 0.4 mm nozle
- 0.1mm layer height
- 30% gyroide infill
- print with supports (except pins)