Right-angle hose adapter for QIDI Tech X-Plus3 BackPanel MOD Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Right-angle hose adapter for QIDI Tech X-Plus3 BackPanel MOD Kit
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Do not use this model. See my new version that uses a fan. This one provides too much air resistance to vent effectively.
I wanted a right-angle hose adapter for QIDI Tech X-Plus3 BackPanel MOD Kit that I could use with a smaller diameter hose.
Adapter is push fit. Air leakage should be minimal.
This is the hose: https://www.amazon.com/dp/B0B6W2M295
Print this flat side down. You will need supports under and inside the small diameter adapter. PETG/ASA/ABS recommended. Print it hot for higher layer adhesion (since we're printing a circle not as hoops).