1 / 1
Henri Fountain PS1 Mag-drive Pump bushing and sleeve
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Longer and wider bushing for Henri PS1 Pump + TPU end sleeves
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Rotor bushing for Henri Fountain PS1 Pump. Printed in ASA. Pump was making annoying humming noise. Discovered there was a significant gap between the rotor and OEM bushing as well as to much clearance between the housing and Rotor. This bushing solved the noise problem.
UPDATED: Both silicon end sleeves on the rotor shaft split. Added a file with TPU substitute. Print slowly.
Please Review and Share your Make 😎