1 / 3
Lego McLaren MP4/4 & Ayrton Senna 10330 Horizontal Wall Mount Display — zdjęcie 1
1 / 3

Lego McLaren MP4/4 & Ayrton Senna 10330 Horizontal Wall Mount Display

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Horizontal command strip wall mount for the Lego Senna McLaren wall mount 10330.

Ocena
0 / 5
Polubienia
43
Pobrania
152
Wydruki
0
Wyświetlenia
2190
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial

Designed to match Large size Command strips. Lego style adapter to connect into the bottom of the base mount for the car. Print 2 mounts and click into the locations shown.

There are two mount lengths depending on the offset you want from the wall. 143mm model leaves ~18mm from the wall; 127mm leaves ~2mm from the wall. 

Print with studs up to ensure they fit properly. Use supports. PLA recommended.

Disclaimer: I am not associated with Formula 1, Lego or Command strips. These companies are only mentioned as their products are compatible with this design. There is no intention to infringe on any of their intellectual property. 

Tagi