Traffic Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Traffic Light designed for the city-themed 2024 Christmas Community Print Drive.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 361
- Wydruki
- 8
- Wyświetlenia
- 1278
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
Stop, slow, or GO! Terrific for a 4-color print!
Original design for the 2024 Christmas Community Print Drive.
The Traffic Light prints on its back. There is a whole-model version and another with the base and colored light pieces separated. The “(sep)” models should align properly using appropriate commands in the slicer.
More Models: Collection of all approved 2024 Christmas Community Print Drive models
Additional Information and Print Settings
The model is approximately 50 x 98 x 37 mm. I printed with 0.2 mm layer height, 3 perimeters, 4 top and bottom layers, and 15% infill. No supports. No raft.
| If you are printing for the Community Print Drive, be sure to use the appropriate guidelines: 2024 Christmas Community Print Drive Printing Guidelines |
More of my designs on Cults3D: https://cults3d.com/en/users/abbymath
Not for commercial use. No derivatives. See license below.
Note: Most photos from earlier, smaller model. Print Drive standard models are posted here.