1 / 2
Ubiquiti Unifi Protect G4 Instant 45 degree Adapter Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 45 degree clip-on mount adapter for Unifi Protect G4 Instant cameras. No tools required.
- Ocena
- 3 / 5
- Polubienia
- 25
- Pobrania
- 470
- Wydruki
- 1
- Wyświetlenia
- 1712
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (2)Kolekcje (51)Powiązane
This model clips into the existing quick snap fittings for the Unifi Protect G4 Instant and allows the camera to be angled downwards more than the existing swivel arm allows. The angle of this model is 45 degrees downward. The connector clips have been made thicker with extra support to add strength when 3D printing.
Layer height: 0.2mm (worked well for me)
Support: None needed.
Orientation: Print with socket side down flat (or auto-rotate).