Aerobed Valve Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptor built for 3D printing, to adapt a large airhammer brand manual pump to aerobed proprietary twist lock valve.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 178
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Adaptor for airhammer hand pump to connect and seal to the Aerobed proprietary twist and lock valve system.
These beds come with a battery operated electric pump but when the niMH batteries inside the pump die and won't charge anymore, you need to use a manual pump. You can also make a new battery pack to put inside the electric pump, using 8x AA size rechargeable flat top batteries spot-welded in a series configuration with a 3D printed jig to arrange them, but this is more complicated than just using a hand pump!
This is designed so that you install a 52.8mm OD, 47.5mm ID, 2.65mm thickness nitrile rubber o-ring in the end and secure it with a dab or three of superglue. Airtight seal in a half twist!