Bessey edge clamp KT5 holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder for Bessey edge clamps. You can screw this to any place with some countersunk screws.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I have several clamps in my workshop and almost all o them are stored for easy access. The edge clamps from Bessey are a bit quirky with a big head, no real handle or bar to hang them. So they were lying around in a drawer and when I needed them I forgot I have them.
As I was searching for a hanger/holder for the clamps I found nothing would suit my needs. Therefore I made my own. I designed this one purely functional. It is sturdy enough to hold the clamp even made out of PLA. You can screw it to your wall with 2 countersunk screws. If you want to attach the holder to some pegboard or so feel free to remix it.
Printed in PETG with 20 % infill and 0.2 resolution.