PS5 Dualsense Stand - Comercial use License - Step File
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Comes with editable file and license for commercial use.
- Ocena
- 0 / 5
- Polubienia
- 22
- Wydruki
- 0
- Wyświetlenia
- 1014
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Commercial Use
This Stand was developed right when the PS5 was launched, and inspired by its design. The fit has been carefully measured and tested to keep the Dualsense stable and secure.
There is a free version on my profile without an editable file available for those who will print for their own use, but it does not allow commercial use and I keep an eye on unauthorized uses.
Files
- Middle body: The main part
- Left Panel: Available in 3 different tolerances 0.10mm, 0.20mm and 0.30mm to find the best fit.
- Right Panel: Available in 3 different tolerances 0.10mm, 0.20mm and 0.30mm to find the best fit.
- PS5 logo: To glue in the Main Body or side Panels.
Print Settings:
5 Walls works well for the Main Body and Side panels
0,2 Layer height is recomended
At least 25% infill for the panels.
Assembly:
To attach the panels to the middle body, I recommend using super glue or epoxy glue.
License:
This license allows you to sell 3D printed parts with these 3D models and also remix them to meet your needs.
The comercial use is only for 3D printed parts! Not the Files or Remixes.