Polyhedral Dice Case (print-in-place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for a set of polyhedral dice for use in tabletop RPGs such as Dungeons & Dragons.
- Ocena
- 4,857 / 5
- Polubienia
- 104
- Pobrania
- 713
- Wydruki
- 14
- Wyświetlenia
- 1835
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Stores the 7 polyhedral dice commonly used in tabletop role playing games. The case is designed to accommodate most standard-sized dice, but a successful fit will vary by set.
Inset lid graphics for each of the 6 dice polyhedra are available to choose from. You can also use the blank STL & STEP files to create your own design.
Print Instructions
Recommended material is PLA. Designed for a 0.4mm nozzle; 0.2mm layer height, no supports.
Changelog
2026-05-03 - v2.1
resolved minor hinge geometry issue
tweaked latch & hinge tolerances
reinforced opening area recess
edited d8 lid graphic
2025-07-14 - v2
enlarged all dice slots
positions of d20 & d12 switched
robustness improvements to hinge, latches, & lid
aesthetic redesign & proportion adjustments
sunken case interior to improve access to dice
added STEP files
new lid graphics
edited description
2024-07-27 - v1.1
fixed minor chamfer discrepancy/lid alignment issue
overhauled dice slots for d20 & d12
minor edit to dice slot for d8
decreased depth of lid graphic
edited description