Under desk mount for AmazonBasics mini 4-port USB hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An under-desk mounting solution for AmazonBasics 4-port USB hub
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an under-desk mount for the AmazonBasics 4-port USB hub that can be found here:
https://www.amazon.com/dp/B00DQFGH80/
This was designed so the hub could be mounted with the ports flush with the front edge of the desktop. The height of the mount is intentionally slightly shorter than the thickness of the hub so that once the mounting screws are tightened, it will hold the hub to the bottom of the desktop firmly and keep it from moving around at all.
I printed it with PLA on a Prusa mini with bottom tray flat against the bed. You will need to generate some supports in your slicer for the three mounting tabs.
Works perfect for me and I hope it is useful for you!