Bestep L298N Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for the Bestep L289N motor driver
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a L298N motor driver board that does not match the housing available on Printables, so I made my own housing. Board is labeled as a "Bestep" L298N"
Consists of a main body + friction fit lit.
While I added some ventilation slits, this is not highly ventilated, so I would not use this for high drive currents.
If lid does not fit right, you can try scaling it as it is sized to my personal printer's (P1S) tolerance.
Printed in Polymaker Polylite ASA Natural, 0.4mm nozzle, 4 walls, mouse-ear brims
Hardware:
- 4x M3x4mm heatset inserts (https://www.amazon.com/dp/B0CZRD2Y49)
- Driven at 200c
- 4x M3x5mm screws (to secure board)
- Screws to mount box (holes are sized for #8 wood screws)
- Driver boards: https://www.aliexpress.us/item/3256806176840867.html
I recommend this model for tolerance testing prior to printing: https://www.printables.com/model/413553-hydra-ams-test-pieces