1 / 4
Replacement Shrouded/Boxed Header Lock Arm Ejector Lever China/Taiwan 2x(xx)P IDC(xx) Ribbon Cable Connector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Searching the webs cuz you broke one? Here ya go. Lock Arm for IDC cable P connector - works with Elegoo Neptune 4 head
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Replacement Shrouded Header Lock Arm Ejector Lever Chinese/Taiwan 2x(xx)P IDC(xx) Cable Connector
Searching the webs cuz you broke one? Here ya go.
Surprisingly strong - and you can always print another
Works with Elegoo Neptune 4 series extruder heads
Print with PETG or ASA
Use gluestick or spray on the bed - not a brim
Print one part at a time - slowly
0.4 mm nozzle
0.12 mm layer height
0.2 mm first layer height
outer wall first
3 walls and 2 shells
100% infill -concentric
- Put a drop or two of super glue on HalfUhLever and spread it evenly with a toothpick.
- Sandwich HalfUhLever and OtherHalfUhLever together and line them up.
- Hold them together until the glue sets and your fingers are permanently stuck to the lever.
- Pop the lever straight down into your cable connector and your GoodTuhGo.