TV Foot Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Foot extension to raise a TV.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 185
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to raise my TV up a little bit to clear the sound bar on the TV Stand. These extenders for the feet add about a 30mm (1.25") lift to the TV clearing the soundbar, and exposing the IR receiver for the remote. I designed these to be a quick print. Four at once took about 2 hours and 40 minutes.
I am using this with an LG 55" TV. I tried to make this as universally compatible as I could, but I am also including the STEP file if you want to modify it.
Notes: Just to keep things strong I had 6 layers for top and bottom, and 4 walls. This has made this plenty strong for this TV. Infill was at 25% triangle.
Recommendation:
I added some non-skid material on the bottom of the feet. I have been using CatTounge grip strips on most of my projects lately, and I am quite happy with the results. https://a.co/d/anOxRvy