1 / 3
Xia Solo card holder and token tray spacer (wider) — zdjęcie 1
1 / 3

Xia Solo card holder and token tray spacer (wider)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slightly wider card holder, with rebuilt topology to eliminate slicer gaps

Ocena
0 / 5
Polubienia
3
Pobrania
34
Wydruki
0
Wyświetlenia
208
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

 I modified @Corey's remix to make a little more space for sleeved Solo cards, and fixed some problems with his model that were causing gaps in the slicer with a 0.8mm nozzle. 
This is a companion part of my individual piece remix for the cargo container spacer from @Fabmaszter's Xia insert, where I replaces the spacer that holds the cargo and ember containers with a single-level version, allowing you to put the thick-cardboard version of the Ship Mats above the damage/coin tray - minimizing box lift.

The 3.5mm increase in width helps make everything snug again, and avoids potentially damaging sleeved cards.

Printed 0.8mm, with 0.4 layer height in esun PLA

 

Tagi