T.Rex Moneybox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This rexy is hungry for coins!
- Ocena
- 4,5 / 5
- Polubienia
- 19
- Pobrania
- 145
- Wydruki
- 1
- Wyświetlenia
- 563
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This money box/piggybank, when printed at the provided size, can output coins of 2.5cm diameter at the base but can devour coins of 3 to 4cm diameter.
The coins are inserted into the mouth and can be removed by unscrewing the cap at the base or tipping the piggybank forwards for coins to come out of the mouth.
Supports are required on this model.
Use the “tree” support style, and don't use any brims.
Printing it larger is always recommended. Do not print it any smaller unless the coins you intend to use are small.
I recommend printing it with matte filaments as it shows the scale details better and is easier to paint on.
Whilst a solid version of the model is provided, to reduce the amount of scarring from supports, I advise using the “chopped” version.
The other two dinosaur piggybanks are available on my Cults3D and Printables stores:
https://www.printables.com/@zuperbuu_1527797/store
https://cults3d.com/en/users/zuperbuu/3d-models