1 / 3
PRUSA MK4 Y Belt Idler Mod - Improve Y axis finish on prints — zdjęcie 1
1 / 3

PRUSA MK4 Y Belt Idler Mod - Improve Y axis finish on prints

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ive been investigating y axis imperfections on prints and found that the stock idler will drift causing imperfections

Ocena
0 / 5
Polubienia
9
Pobrania
88
Wydruki
0
Wyświetlenia
838
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

This Y axis idler will fix the idler into deadset center, wich will stop any drift the idler has on the roll pin,

Measured 1mm worth of drift, wich is enough to cause imperfections on the print,

 

The idler bearing sleeve will be an interference fit with the printable part, wich will allow the idler to rotate freely, (its tight by design)

 

This has been a nightmare to identify as it will drift with time, not necessarily on the first install!!!!

 

this drift will cause the belt on the y axis motor to rub and cause vertical line artefacts on the y axis.

 

Recommend installing a toothed idler,

2GT/GT2 Pulley

Borehole Size: 3mm

Size & Style: 20T w/ Teeth

Belt Size: 6mm

 

Once isntalled, highly recommend readjusting the y motor pulley belt to its deadset center position aswell to stop any side rubbing

 

also recommend to install my other y axis motor holder mod with a 2mm offset

https://www.printables.com/model/693877-prusa-mk4-y-motor-holder-with-2mm-offset

 

 

Printed on a PRUSA MK4, in PETG, 0.2mm layers and 3 perimeters, 15% infill

Tagi