Iris Weatherpro latch replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These latches tend to go missing in the store pretty often - now you can replace them!
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 74
- Wydruki
- 2
- Wyświetlenia
- 445
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Public Domain
I bought these 44qt bins at Costco, though I also see them listed on Home Depot's website. Pic #2 shows the label on mine - I can't gurantee they use the same exact latch on every single unit.
Printing instructions:
Print files come oriented correctly. Print the pin flat on the bed with supports on for the peg. Print the latches vertically on their end, no supports. A brim may be beneficial for the latches, due to their height. Drop the pin into the latch and install.
I used PETG with 3 walls, though fewer walls and PLA should probably work just fine as well.