1 / 2
Smallrig Blackmagic 6K 6K Pro Cage to 6K Full Frame Bolt — zdjęcie 1
1 / 2

Smallrig Blackmagic 6K 6K Pro Cage to 6K Full Frame Bolt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bolt to keep the Smallrig cage for the 6K/6K Pro cage aligned to the 6K Full Frame. Not for full support.

Ocena
0 / 5
Polubienia
1
Pobrania
24
Wydruki
0
Wyświetlenia
425
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

Bolt to keep the Smallrig cage for the 6K/6K Pro cage aligned to the 6K Full Frame. This is not for full support to hold down a rail or anything like that. I just didn't like the wobble it had without some support.

I also wanted it low profile so I could mount a Falcam F22 rail on the front two holes.

When installing, I had to trim the tip of the bolt to get the thread to start. This is something I had to do no matter the length, so I think it is something with the design that I do not know how to fix. I made this in OnShape, so I included the .x_t file in my Thingiverse upload. The filetype was not supported here.

 

https://www.thingiverse.com/thing:6657812

Tagi