FLIP KNIFE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One part flippin' flip knife!
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 162
- Wydruki
- 0
- Wyświetlenia
- 731
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Introducing the FLIP KNIFE.
It is printed in one part, it can lock the blade in the handle and most important, it flips!
I have two versions, V1 and V2.
-V1: This one has the blade tip a little longer and requires a little bit of clipping so it can lock in the handle, only clip little by little of the tip( first close the blade to estimate where it would need to be cut ) until you think it's fine.
-V2 should solve this problem as I added a “cut” in the handle exactly of the blade tip dimensions but it's still experimental as some of my prints had some problems there.
--The model should be printed standing (like in the gcode I posted ) for the best results!--
!Not for kids, it contains sharp parts!