1 / 3
Fractal Design 7XL HDD Tray B (UPDATED) — zdjęcie 1
1 / 3

Fractal Design 7XL HDD Tray B (UPDATED)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fractal Design 7XL HDD Tray B

Ocena
0 / 5
Polubienia
13
Pobrania
100
Wydruki
0
Wyświetlenia
895
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

I made a "homemade" HDD tray for the Fractal Design 7XL. You can print it at home, as you don't have to buy it from the store.

Note: This model is currently being tested as a prototype. PLUS, the Tray B.step is only for Seagate Ironwolf HDD installation only (due to missing the two holes for other brands's dimensions). I will make an update later. 

UPDATED: The Full Tray B.step is now allowing all brands dimensions (Last picture)

My recommendation for the printing setting is:

-PLA (that is what I am using for now).

-0.20mm with shug support.

-Infill: 5% or more.

For the installation - I use the M3x8 hex socket head cap screw. I believe the official thread is #6-32. Seems the M3 is fine. But do your risk for the screw.