1 / 3
Geared Sith Holocron
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Embrace the power of the dark side with your own Sith holocron. Corners are mechanically linked so they spin together
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 709
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (42)Powiązane
Fully printable Sith holocron. Corners are mechanically linked so they spin together.
Assembly instructions:
- Print quantities as listed in the file name. I recommend using Prusaslicer's automatic painted supports for the gears.
- Install gear-2 in each of the 3 body corners
- Press the 3x gold side triangles onto gear-2
- Orient gold side triangles so they sit flat against the ground
- Install gear-1 into the top body half
- Press the gold top triangle onto gear-1
- Make sure your corners are aligned! Press the body halves together to link gears
- Install the bottom body flat to tie the body together
- Spin the top triangle. You may need to run your gears in a little, but everything should spin together. If not, peel the body open and adjust or add grease
- Glue the red body and top triangle windows on
You can get some neat translucent effects by using a color swap after 1 or 2 layers on the windows. Play around and have fun.
The multi-color 3mf file is for people who have a multi-color system. It is not necessary to build a holocron.
Also available on Thingiverse