Thermal Imager Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for my thermal imager camera.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is my mount design to keep my UNI-T UNI260B thermal imager camera safe and out of the way. My design is a simple vertical mount. My mount can be secured to a vertical surface with double sided tape or two 3.5mm screws.
My print is made in Bambu Lab PLA Tough Gray filament, with 0.2mm layer height and 15% infill on a Bambu Lab X1 Carbon printer. Print supports are not required.
I hope that you can find this print useful, too.
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.
For my latest models, see my main uploads site at MakerWorld as “Wiseone”.