Operation "Icarus" organizer - Dust Tactics/1947
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't like how much room the plastic tray took as well as I need to take apart the "Seargent Victory" miniature to…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't like how much room the plastic tray took as well as I need to take apart the "Seargent Victory" miniature to put it back in the box so I modeled a simple organizer box with a lid that locks into place to keep the parts stored and neat while also getting rid of the big plastic tray. This allows me to store more Dust figures inside one campaign box.
The organizer is 4.20 cm tall and I used Cura custom supports to support overhangs found where you connect the lid to the tray. I only own the Operation "Icarus" box so I can reference how I organized the miniatures around that but I have the STEP file just in case someone wants to make their own changes. I've also included a combined and separate version. Keep in mind though, I've only printed the combined version.
The combined version took around 100 grams of filament and 12 hours to print. This may change based on your personal settings but I used Cura default settings.
(Optional): I've added some soft foam board/paper to rest the miniatures, this is shown in red in the photos.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.28 (low)
Infill:
7-10%
Filament: MatterhHackers MH Build PLA 1.75mm
Forest Green
Notes:
Use Cura custom supports for the part where the lid rests, you could also not use supports but you might need to cut drooping filament overhangs.
Image quality is low because I had to compressed them due to an upload limit on thingiverse per image of 500 kb.- Printed with Ender 3 V2, not Ender 3 Pro *
Category: 3D Printing