Plant Pot 4 Window Sill

Heyho!

Here in Germany the weather is quite bad at the moment but I want to grow some plants that need good some good light and higher temperatures than we have outdoors.

So I designed this plant pot to improve the “situation” at my window stills!

Design advantages: 

• More capacity, as no more space is wasted by conical pots! (Picture A)
• Optimized center of gravity so that the pots are stable and don't accidentally fall down!
• The shape bypasses the window frame in order to have as large an area as possible in the upper area. (Picture B)
• The plant can be easily repotted thanks to the squeeze-out insert without damaging the root system. (Picture C)
• Coaster to keep the window still as clean as possible. (Picture D)
• Scaleability! To fit the pot to individual windows & stills. (Picture E)

Print Instructions:
You can print the pot in Vasemode. But I would recommend to use a bigger Nozzle/ extrusion width ≥ ,8 mm. If you use a ,4 mm Nozzle I would not recommend it.

Layer height doesn't really matter. I used PLA and had no problems.

A)

B)

C)

D)

E)
The File “M” is the “L” file scaled down to 80%.
The File “M_low” is the “L” file scaled down to 80% and 60% in Z direction.

Have fun!