LM2596 x3 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount that will hold up to three LM2596 buck converters to a surface. This was meant to upgrade the fans in…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 111
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a mount that will hold up to three LM2596 buck converters to a surface. This was meant to upgrade the fans in my CR10S Pro, but the power supply is 24v. These buck converters allow me to step down to 12v (or lower) to power 12v fans, as well as a Raspberry Pi mounted inside the base as well.
These are the devices - https://tinyurl.com/y4ay2sv5
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
100
Filament: Any Any
Any
Notes:
Printed at .2 in PLA, 100% infill, 3 outer shells
Category: Electronics