Flexible Shower Bar Wall Mount / Flexible Wandhalterung für Brausestange
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We had some trouble to find a replacement for our shower bar which fits into the existing holes. Went to the local OBI…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
We had some trouble to find a replacement for our shower bar which fits into the existing holes. Went to the local OBI store and bought a replacement with fixed mounts (25mm bar) and basically recreated the mounts that came with the set and made one of them flexible.
Basically, this should work with any 25mm shower bar. The F3D files are attached so you can easily edit it. The chrome thingies in the front part are actually from the original part, I have designed the part so they snap-fit in (the part I bought is a OBI brand, "OBI Braustange Teja (or maybe Tejo..) with 101 cm
I'd recommend to print this either in PETG or ABS so it can withstand the conditions in the shower/bathroom.
A screw can be pushed down the middle tube and will hold the whole thing in place.
I am pretty happy with the result, that's why I'm sharing it.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
25% or higher
Filament: Cuber3D PETG
White
Notes:
Supports are optional, I printed mine without (depending on your printer). Print it with the front side down, the bridged part might look a bit messy, but you can hide it by fitting something in the opening and it does not affect the stability.
PETG or ABS is recommended so it can withstand the conditions in a shower / bathroom.The CAP is basically a cap for the 25mm bar which sits on top of the whole thing and snap fits onto it.
Have fun and share your results / remixes :)
Category: Bathroom