Fast tolerance test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We have designed a small tolerance test
- Ocena
- 4,8 / 5
- Polubienia
- 48
- Pobrania
- 234
- Wydruki
- 6
- Wyświetlenia
- 1325
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Idea for this test is to see how capable is your 3D printer to print the upgrades we are designing for.
No one want to see after printing a lot of part that they are not fitting.
If after you print this fast tolerance test you will be able to :
Fit the screws in the hole designed for and screw the M3,M4 and M5 Screws in the 3d printed thread you are ready to go.
IF not you need to fine tune your filament/printer. If you need guidance ask in the comment section.
Print Settings
0.4 nozzle
0.2 Layer height
Print without support
The Diagonal is 30mm measure on the top part
The design has also a 3mm horizontal hole to test the tolerances print with no support
The Holes are .2mm bigger to compensate for shrinkage