Gridfinity Labeled Lightweight Bins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thin walled bins with no magnet base for standard gridfinity. Accommodates 1/2" P-Touch labels.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Wanted to make a lot of bins cheaply. I saw a lot of good ideas but not the combination of lightweight with labels and no magnets in the base. Made these by combining ideas from various models seen here. The label shelf is at the back and angled forward for easy viewing. It has room for ½ inch label from a typical label maker. I have 3 sizes 1 x 3 x 6, 1 x 2 x 6, & 1 x 1 x 6. I will add to this if I need different sizes.
I printed these on a Prusa Mk 3.5 with a 0.6 nozzle and a layer height of 0.4. Prints without supports. I used the cheapest PLA I could find. Small bin costs 9 cents (USD) and prints in 24 min.