TwoTrees Sapphire Pro Hood Pillars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will allow you to enclose the top of your printer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This is a simple system I put together to simply add a hood to your Sapphire printer. You will need to print 4. I suggest you create a modifier box on the bottom high enough to go over the screw base. I included pics.
Material: ASA or ABS recommended, but PETG or PLA will work.
Infill: 30-40% overall, 70-100% for the bottom modifier.
Once you print them you will need to get a longer screw to screw them in. Use a 3/16 drill bit and bore out the hole to fit the M5 screw. You will need a M5 20mm Hex screw.
Once mounted you can measure what you need for Plexiglass. A standard 3mm (1/8 in) acrylic sheet will fit in the slots.