Keyboard switch tray (Kailh, Zealios/Gaterons)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Note: Vase mode with a brim is required. This also hollows out the top so that a label can be slipped in.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 636
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Note: Vase mode with a brim is required. This also hollows out the top so that a label can be slipped in.
A customizable clone of the plastic trays provided with MD's Halo True/Clear switches. The trays keep the switches nicely organized.
The 154mm STL matches the black stock trays, but make any length you want with the Customizer (or by loading the .scad file into a local OpenSCAD installation).
Note: These flex and fit a bit tightly on purpose, so that the switches don't fall out when flipped upside-down.
Thanks to https://www.thingiverse.com/thing:2805184 for making customization possible (DXF imports are not allowed with Customizer).
Print instructions
Category: Tool Holders & Boxes Print Settings
Notes:
Atomic Filament Aqua Translucent PETG
0.2mm vase mode, Slic3r PE