3D NASA Insignia / Logo / Sign / - Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you like iluminated signs or NASA this should be just right for you.
- Ocena
- 4,5 / 5
- Polubienia
- 138
- Pobrania
- 264
- Wydruki
- 4
- Wyświetlenia
- 2112
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
This is what happens when a future engineer who is interested in aerospace got a lot of time and an empty wall.
I designed this sign to more or less max out the capactiy of my Ender 3 Printer, as you can see i desgined it so that LED-Strips can be installed.
The base of the design is 420mm in diameter and i used about 1.5kg of PLA (all colors).
So this isnt a cheap Project, you will also need a few screws, a LED-Strip and a cable.
I made an printing and assembly Guide, if you plan on printing this i would suggest reading it first.
if you got any questions leave a comment.