DUCKYMOUNT - DJI Action 2 Mount for FPV Drones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very variable FPV Action 2 Mount with a PLA Insert to protect the Backscreen from LiPo Impacts.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 432
- Wydruki
- 0
- Wyświetlenia
- 1404
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
First of all: DM me on Instagram (@ente.fpv) so I can make a mount for YOUR frame specifically :)
Say Hello to the DUCKY MOUNT The okayest mount for the DJI Action 2!
The DJI Action 2 is known for having a VERY fragile backscreen . To protect it, I made… this?!
FAQ:
What is weird piece on the back?
❗ To protect it against back hits from the LiPO, the PLA Piece slid into the back of the mount. Like the Cumple Zone of a Car, this easy to replace PLA piece is MEANT to break during a Crash, to absorb the energy as much as possible. It’s because of Science you know.
Standard is recommended, Hard likely won't break and will transfer more energy of the impact to your Backscreen.
My Cam’s screen is already broken, I wanna safe weight and precious filament!
❗ Get the Version without the LiPO Protection.
Is it bAnDOprOoF?
❗I don’t like that term. The Mount is tough, but of course I can’t and I won’t guarantee that the Cam will be fine after every crash. The physics of hitting a steel beam at 60 mph are not disabled by a little TPU Mount. Nothing really is „Bandoproof“, stop saying that something is…
How much does it cost?
❗ It’s FREE. I would love to get a follow (Instagram @ente.fpv) and feedback though, to keep the design at its best possible. Spread the word and get people to fly with the DUCKY MOUNT. There are extremely overpriced options out there, which aren’t bad by any means, but definitely not better either.
Who TF chose that stupid name???
❗ I couldn’t think of something better, sorry. (just request and download the .step and change it)
When you steal the design and sell it as your own though, I hope that your spoon slides into your soup and that your sleeves get wet when washing hands.
——————————————————————
Thanks to all the Beta Testers, give those guys a Follow!
@luky.fpv
@voxyn.fpv
@sascha_fpv
@chris_grab_fpv
Thanks a lot as well to @t4obrien for being a GREAT inspiration. He designs Mounts as well (better ones). So make sure to check them out!
DISCLAIMER:
Use at own risk. I won’t be responsible for any broken cams.
3D PRINTING SETTINGS
The protection Piece HAS to be PLA! Print it standing upright with the latch down.
The Mount itself:
